Here are the details about the SuperNatural® package from Callaway’s promotional materials:
Callaway Viper 440 Six-Pack
0-60 in 4.1 seconds
Quarter Mile in 12.5 seconds @ 115 mph
Callaway Cars is pleased to introduce the first SuperNatural® package for the Dodge Viper, the Callaway Viper 440 Six-Pack.
Applying the principals of “tuned natural aspiration” developed successfully on the Callaway SuperNatural® Corvette ZR1 and LT1-based 400/383, the Callaway Viper 440 Six-Pack enhances the 400 Viper engine’s breathing with improvements to both the intake and exhaust systems. It gives a noticeable improvement in the Viper’s already exciting performance, better throttle response and a more pleasing exhaust note.
The Callaway Viper 440 Six-Pack consists of three elements, each duplicated for each bank of the RT/10 engine:
· High capacity air intake with low restriction air cleaners and laminar flow ducts;
· Port-matched throttle bodies; and
· T304 stainless steel cat-back exhausts with proprietary mufflers.
Installation takes three days at Callaway’s shop in Old Lyme, Connecticut. Each Callaway Viper 440 Six-Pack is test driven to ensure its performance and reliability. Replacement parts, including air filter elements, are readily available from Callaway. The Callaway Viper 440 Six-Pack does not affect the factory warranty from Dodge.
The factory “look” of the Viper is not affected. The cat-back exhaust fits under the stock Viper side pipe covers. Under the Viper hood the only visible change is a pair of mirror-polished 6061-T6 aluminum alloy high-capacity ducts that replace the convoluted stock air ducts between the filter enclosure and the throttle body. Available at the owner’s option is “Callaway 440” identification for the front fender just under the “RT/10” Viper logo.
Callaway Viper Info:
-
- VIP COG Brother
- Posts: 3878
- Joined: Wed Aug 27, 2008 4:46 pm
- Location: Old Lyme, CT
- Contact:
Callaway Viper Info:
I thought this would be of interest:
- Attachments
-
- DDG-1995-001, Callaway Materials, CCE00000.jpg (45.57 KiB) Viewed 6910 times
- Brangeta
- 11-PSI
- Posts: 711
- Joined: Wed Aug 27, 2008 11:30 pm
- Location: Dallas, TX
Re: Callaway Viper Info:
Holy crap! 40 horsepower from a cat-back, air intake, and throttle body! I'm impressed! Never knew the throttle body did much if anything to performance.
4th Generation Camaro History site:
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com
- Jeroenvgfn
- Site Admin
- Posts: 1942
- Joined: Thu Aug 28, 2008 2:17 am
- Location: Netherlands, Europe
- Contact:
Re: Callaway Viper Info:
thanks Chris, This is what I have been looking for
Callaway Owners Group : Division Europe
Callaway C1 project registry member
Callaway C1 project registry member
- BIGJOHN
- VIP COG Brother
- Posts: 2811
- Joined: Thu Aug 28, 2008 12:24 pm
- Location: Ledyard, CT.
Re: Callaway Viper Info:
BRANDON,Brangeta wrote:Holy crap! 40 horsepower from a cat-back, air intake, and throttle body! I'm impressed! Never knew the throttle body did much if anything to performance.
THE THROTTLE BODYS ON THE EARLY VIPERS; AFTER THE THROTTLE PLATE, THE DIA. GOT SMALLER.
THIS IS HOW THE PORT MATCHED TROTTLE BODYS IMPROVED AIR FLOW.
- Brangeta
- 11-PSI
- Posts: 711
- Joined: Wed Aug 27, 2008 11:30 pm
- Location: Dallas, TX
Re: Callaway Viper Info:
Oh! Well that makes sense then!
4th Generation Camaro History site:
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com