TVS blowers
- Luigi
- 15-PSI
- Posts: 1766
- Joined: Wed Aug 27, 2008 3:31 pm
- Location: South Florida
- Contact:
Re: TVS blowers
Also if you go http://www.magnacharger.com/
Mine looks like the one that appears under Kenny Dutweillers 950HP LSX video which is the 2300 (8 crate).
Just an observation.
-Luigi
Mine looks like the one that appears under Kenny Dutweillers 950HP LSX video which is the 2300 (8 crate).
Just an observation.
-Luigi
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: TVS blowers
DoneLuigi wrote:Surf, can you put the model numbers to the schematics?
-Luigi
- Luigi
- 15-PSI
- Posts: 1766
- Joined: Wed Aug 27, 2008 3:31 pm
- Location: South Florida
- Contact:
Re: TVS blowers
Here is a bigger picture of my engine
-Luigi
-Luigi
- BIGJOHN
- VIP COG Brother
- Posts: 2811
- Joined: Thu Aug 28, 2008 12:24 pm
- Location: Ledyard, CT.
Re: TVS blowers
LUIGI'S CAR IS USING A PREPRODUCTION 2300 SUPERCHARER.I Bin Therbefor wrote:Please note that these diagrams are of the rear intake units, not the front intake units as installed on the Corvette.
The statement below applies to the usual blower, not the TVS blower. It would not suprise me if it applies to the TVS blowers, but I don't know that for a fact. You've got a 1900 unit. The 2300 isn't shipping. Last I talked to Callaway, they said they were in the process of engineering the 2300 for the Vett but didn't have any other information to share at the time.
"You can buy the kit from any of the authorized Callaway Magna Charger Dealers or directly from Callaway Cars, Inc. Callaway is the exclusive worldwide distributor of the Eaton/Magnuson Supercharger System for Corvette. All Corvette supercharger kits that use the Eaton/Magnuson Supercharger come to market through Callaway, in any case."
[ifrom CAllaway FAQ][/i]
-
- VIP COG Brother
- Posts: 3878
- Joined: Wed Aug 27, 2008 4:46 pm
- Location: Old Lyme, CT
- Contact:
Re: TVS blowers
Luigi wrote:If you count the number of crates on the blowers in the schematics, the upper blower case shows 7 crates, the lower blower shows 8 crates.
Unfortunately, the two schematics are not labelled as to which model is which.
Looking at one of the pictures that I took of my car, I just counted the number of crates. I count 8.
-Luigi
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: TVS blowers
As the sole distributor of the Corvette Supercharger Im pretty sure Callaway has early access to them. I know the blower on Luigi's car has been on the car for a while. There is no reason its not the 2300 from that standpoint.I Bin Therbefor wrote:Please note that these diagrams are of the rear intake units, not the front intake units as installed on the Corvette.
The statement below applies to the usual blower, not the TVS blower. It would not suprise me if it applies to the TVS blowers, but I don't know that for a fact. You've got a 1900 unit. The 2300 isn't shipping. Last I talked to Callaway, they said they were in the process of engineering the 2300 for the Vett but didn't have any other information to share at the time.
I would also guess they did not re-engineer the casing for front vs rear intake, which would mean the "8 crate" blower would = 2300
Just my thoughts.
-
- VIP COG Brother
- Posts: 3878
- Joined: Wed Aug 27, 2008 4:46 pm
- Location: Old Lyme, CT
- Contact:
-
- VIP COG Brother
- Posts: 3878
- Joined: Wed Aug 27, 2008 4:46 pm
- Location: Old Lyme, CT
- Contact:
Re: TVS blowers
Power is 650 hp
Torque is 600
Torque is 600
- BIGJOHN
- VIP COG Brother
- Posts: 2811
- Joined: Thu Aug 28, 2008 12:24 pm
- Location: Ledyard, CT.
Re: TVS blowers
THE POWER AND TORQUE WAS A LITTLE MORE THAN WHAT CHRIS SAYS, BUT CLOSE.I Bin Therbefor wrote:Big John
Message recieved AND understood
- Luigi
- 15-PSI
- Posts: 1766
- Joined: Wed Aug 27, 2008 3:31 pm
- Location: South Florida
- Contact:
Re: TVS blowers
Oh yeah!
-Luigi
-Luigi