I finally took delivery of my 2012 GS Callaway. I am swapping out all the fluids, but before doing the engine coolant does anyone know if there are any addition procedures that must be done due to the supercharger or can I do the following.
1) Drain coolant
2) Pull and clean out Surge Tank 3) Start engine, idle 4 min
4) Top off surge tank 50/50 Dex Cool mix
5) Run engine to operating temperature
6) Let cool
7) Top off if needed
2012 SC606 Engine Coolant exchange procedures
- Bmakaz
- 2-PSI
- Posts: 23
- Joined: Tue Dec 25, 2018 6:33 pm
-
- VIP COG Brother
- Posts: 3878
- Joined: Wed Aug 27, 2008 4:46 pm
- Location: Old Lyme, CT
- Contact:
Re: 2012 SC606 Engine Coolant exchange procedures
That'll work, adding coolant to fill.
- Bmakaz
- 2-PSI
- Posts: 23
- Joined: Tue Dec 25, 2018 6:33 pm
Re: 2012 SC606 Engine Coolant exchange procedures
Great thx. I assumed as much, but not knowing if coolant runs into the throttle body or not. Better to ask a question than waste time and frustration as to why the system will not purge.