My Corvette Life: 1990 Callaway Twin Turbo Project

Discussion of Corvette based Callaway Cars including: 1987-1991 RPO B2K Callaway Twin Turbo Corvettes (C4); Callaway SuperNatural Corvettes (CL-1/CR-1); Callaway C12; Supercharged Corvettes; Callaway C16; 6th Generation Callaway Corvettes (SC560, SC580, SC606, SC616, SC620, SC652); 7th Generation Callaway Corvettes (SC627/SC757); NEW Callaway C8 Corvettes - and more!
Sponsored by: Callaway Cars
*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

Good video today.

Callaway is on the Corvette Monroney, as you can see in the lower left, dealer delivered... And you mention on the build sheet, too.

1990 and 1991 cars got CALLAWAY Window stickers, not a 2nd sticker. :thumbs

Also, your car came with the blue transparent top, only. Not RPO C2L, dual roof panels. It would've been $915 as an option. :hi



Attachments
CorvetteLifeB2K Glove Box.png
*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

Was wondering where you went/what happened, or if we should send a search party. Looks like you have encountered the fun of needing specialist tools, which some you have to fab from box-end wrenches, etc. Good times. :thumbs

Please keep us posted on what it costs to rebuild turbos and if the bearings are truly available. Good call on sending them to Rotomaster, and lucky for you, only TWO miles away :thumbs



Previous Owner wrote:Car Specs: 1990 Callaway Twin Turbo AeroBody #34,100hp NOS, GS brakes and cross drilled rotors, Brey-Krause bar,5 pt harnesses, stage3 clutch, dual exhaust/no mufflers, complete MSD 6+ ignition
Previous Owner wrote:My Callaways are doing great! We have moved to central Texas for the winters and I brought my '90 TT Aerobody, '04 SRT10 ram and 71 chevelle down to the land of 'high air density'.
We got down here last year in October, just in time to catch the 'Texas Mile' http://texasmile.com/resultsoctober2005.asp and I entered the Callaway.
With a tech session which required me to borrow a bungy cord to strap the battery down, I was on the runway blasting full speed at full boost. There were some technical difficulties with the timing lights on the Sunday so my first run on motor/boost only, was not recorded. The car ran clean, smooth and at 54 inhg of boost.
"Speaking of CO2 cooling"
While I waited(for an hour) for my second run with boost and a small shot of nitrous I got In Good with the Subaru club who told me to stop by their booth and get some dry ice for the intercoolers. They showed me how they chipped a 3" thick block of solid CO2 off around the corners and mounted it on top of the intercooler of their Wrxs and Imprezas.
On my second run I launced and once into 2nd gear armed the nitrous. I ran the whole mile pushing 60inhg with an air/fuel ratio just a little lean for my liking for nitrous. It was recorded at 167.079mph. The car felt solid and stable all the way down the track with no brake fade at the end.
I then went to meet up with the Subaru guys who set me up with the dry ice blocks. I used a wrench to chip the edges off to where the hood would close around them and waited for a few minutes for my 3rd run.
Run 3, consisted of me realizing that 12lb of boost, 100hp shot of nitrous and intercoolers chilled to -109 degrees F, that there is no way that my expensive kevlar clutch (which has given me problems from day 1) will not hold. By 3rd gear the motor starts revving, the clutch is slipping, there is nothing to do but ride it easy down the mile and hang my head.
I was 8mph away from getting kicked off the track for my cars maximum speed (175mph) without a roll bar. The timing lights were again malfunctioning so no speed recorded for me(slow anyway).
My 167mph run put me at 31st position for the event, which is in the range of Vipers(with exhaust/intake mods) and many of the larger displacement super bikes.
I believe that with a newer clutch and a little more fuel enrichment(maybe some propane) that I can hit the magic 175mph mark in the 5280foot run.
This event is held twice a year and is a great time, with unlimited runs over a 2 day period and a lot of very cool fast vehicles.

One of the biggest things I learned running the standing mile is that after the first 1/2 mile nothing happens fast but the second half. Pulling in 6th gear is long and tedious and once you are at 140-150mph(about 1/2mile) the car does not accelerate like it does in the first half. At those speeds the second half is a blink but the way the car is pulling it feels like forever!

I didn't get any personal pictures but there may soon be event picturex with the aerobody on their site.
Never_Lift
Posts: 175
Joined: Mon Feb 07, 2011 7:28 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by Never_Lift »

Where are the next videos? :sclock

Corvette Life, are you going to pull the whole engine and take a look at things, or will you take a look at compression and leak down prior to disassembly? :wtf

Can you outline what we can expect? I like a TV guide to see what's on the next episodes, so it would be appreciated if you would :beer
User avatar
SurfnSun
Posts: 2258
Joined: Wed Aug 27, 2008 9:44 pm
Location: On the move...
Contact:

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by SurfnSun »

He hasn't logged into this board in a month....doubt you'll get a response.
*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

Another video has been added to the process of sorting this Callaway Twin Turbo Corvette. This one is about painting the manifolds after media blasting them. The videos do seem to have slowed down from him, so hopefully that give him time to check-in with us and share the progress firsthand.

*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

The dude's been gone for a month, and finally posted a clip to say why...



Chris Draper, hope you continue the progress, and the parts you received sound like you're going to have some work laid out for you after the Holidays.

In the meantime, you might want to take note of this thread:
http://callawayownersgroup.com/viewtopic.php?t=1272

And thank you for your mention of www.callawayownersgroup.com in your clips. We are here to help on your journey :thumbs

Be sure to check-in though every once and a while, directly here :hi
Never_Lift
Posts: 175
Joined: Mon Feb 07, 2011 7:28 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by Never_Lift »

Never_Lift wrote: Sat Nov 20, 2021 8:02 pm Where are the next videos? :sclock

Corvette Life, are you going to pull the whole engine and take a look at things, or will you take a look at compression and leak down prior to disassembly? :wtf

Can you outline what we can expect? I like a TV guide to see what's on the next episodes, so it would be appreciated if you would :beer
Is this guy ever coming back to answer anything ? I wander and lose interest easier than most so it’s been kinda boring with out regular posts. Where is the OP :pop
*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

Looks like this week, Chris Draper posted some more videos of his restoration of his 1990 Aero coupe.

Hope he's getting things back on track after his busy December. Chris, drop on by the site. In the meantime... :hi


Air Conditioning Compressor:

https://www.youtube.com/watch?v=IA5PF7DgAAo

Scavenge Pump Oil Tank:

https://www.youtube.com/watch?v=82UCdm4n_cI

Scavenge Pump:

https://www.youtube.com/watch?v=hoju2SQpLdo
*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

Two more videos posted by Chris Draper. Chris, if you drop by, say hello, let everyone know how things are going behind the scenes, thanks :hi


Intercooler Pipe Resto:

https://www.youtube.com/watch?v=4KFmMl5fvus




Starter Removal

https://www.youtube.com/watch?v=EKmY4xDIFEI

*89x2*
Posts: 557
Joined: Tue Oct 21, 2008 9:58 pm

Re: My Corvette Life: 1990 Callaway Twin Turbo Project

Post by *89x2* »

What's the latest, My Corvette Life? :wtf It's been a couple weeks since your last video. Keep your fans posted :cool

In the meantime, here's a couple pics of my aluminum parts which I had Hot Tanked and Bead Blasted. I think it cost a couple hundred bucks for this, maybe just under. Really cleaned up the aluminum like new, and left the finish raw/natural. On a Callaway, the runner and plenum should then be painted with the proper VHT Black: http://callawayownersgroup.com/viewtopi ... 2&start=10

Thank you for your continued mention of www.callawayownersgroup.com in your clips. :beer
Attachments
hottank before.jpeg
Hottank after.jpeg
Post Reply